Stainless steel cable tie gun with 100 cable ties | Bowlift

The cable tie is secure, but the excess end cannot be cut cleanly.

Anyone who has ever attached cable ties to fence posts, pipes, or bundles of cables knows the problem: tightening, shortening, and securing requires several tools, and even then, the result is not durable. This stainless steel cable tie gun takes care of all three steps in a single operation. The tool tightens the cable tie, cuts the excess end flush, and secures the connection – no rework, no loose ends.

Advantages

• No more annoying retightening: After tightening, the connection holds permanently – repeated checking and retightening of cable ties is completely eliminated.
• No second tool needed: The built-in blade made of molybdenum-alloyed steel cuts off the excess material directly during tightening – a separate cutting process is a thing of the past.
• No replacement needed due to weather: Made from 304 stainless steel, the cable ties withstand heat, cold, UV radiation, and moisture – neither rust nor material fatigue necessitate repurchasing.

Specifications

• Material of cable ties: 304 stainless steel
• Blade material: Hardened molybdenum-vanadium steel
• Dimensions of cable ties: 4.6 mm × 300 mm (30 cm length)
• Maximum binding width: up to 12 mm
• Maximum binding thickness: up to 0.25 mm
• Set contents (1 kit): 1 cable tie gun + 100 stainless steel cable ties

Application

1. Inserting: Thread the free end of the stainless steel cable tie into the guide of the gun.
2. Tightening: Repeat the handle action until the cable tie is firmly in place and the desired tension is achieved.
3. Cutting: Activate the cutting lever – the excess end is neatly and flushly severed.

Pro tip: When fastening to round pipes or fence posts, slightly turn the cable tie into the final position before the last tightening pull – this allows it to lie flat, and the cut will be particularly clean.