Glarks 20Pcs Universal Fuel Injector Cleaner Adapter Assortment Kit, Including Carb Carburetor, Jet Cleaning Brushes, Cleaning Needles, Flush Cleaner Adapter Car Fuel Injector Tester

Glarks 20Pcs Universal Fuel Injector Cleaner Assortment Kit, Including Carb Carburetor, Jet Cleaning Brushes, Cleaning Needles, Flush Cleaner Adapter Car Fuel Injector Tester Pump Pressure Test 🥇 [Specification]: ♥Product Type: Universal fuel injector cleaner assortment kit ♥Material: stainless steel, nylon ♥Size: White tubes: 25x109mm/0.98x4.29” Nylon brushes: 128mm/5.04” Cleaning needles: 131mm/5.17” The plug of the alligator clip charging cables: 30.5x12.8mm/1.19x0.5”, 23.5x11.7mm/0.92x0.42” ♥Quantity: 20pcs 🥇 [Product Details]: ☛ This adapter is for DIY cleaning the fuel injector nozzles, you can remove the injectors from the engine and clean them separately. ☛ If the fuel injector is clogged, the engine will stall, idle roughly, and make abnormal noises during driving. ☛ As long as you use it properly, our carburetor cleaning brush carb cleaner kit can be used multiple times. ☛ This cleaning wires set come with 13 different diameters, especially designed to clean out the tiny jets and carb passages from all dirt. Comes with a lightweight, compact aluminum carrying case, a great tool keep on hand! ☛ Only fit carburetor engine motor, carbon dirt deposit remove. Easily clean paint off all the hard to reach areas in an airbrush, spray gun or any other item with small orifices that need cleaning like the fluid tip and air cap. 🥇 [Package Included]: ♥10pcs x cleaning needles ♥5pcs x nylon brushes ♥2pcs x white tubes ♥2pcs x alligator clip charging cables ♥1pc x carb carburetor Total: 20pcs 🥇 [Note]: ※ Manual measurement, please allow slight errors on size.

• ♛【What You Get】: In this kit, you will get 2pcs white tubes, 2pcs alligator clip charging cables come with 2pcs plug, which are large size and small size. 5pcs different width nylon brushes, 10pcs different diameter cleaning needles, 13pcs different diameter cleaning wires. Totally 34pcs. This adapter kit is easy to use with cans of carb cleaner or other cleaner to clean and flush fuel injectors.
• ♛【Fuel Injector Nozzle Working Principle】: Remove the fuel injector from the engine, connect to the 12V power supply, use the pressure of the cleaning liquid to flush through the white pipe, and then clean it through the injector. When the current is switched on, the solenoid valve in the Injector is opened, meanwhile cleaning liquid flush through white tube, then through injector to clean it.
• ♛【Premium Cleaning Brushes and Needles】: These cleaning tools are made of high density nylon and stainless steel material, it's rust-proof, non-deforming with good elasticity and no hair loss, spiral bristles, great access to the inner side, making the washing clearly and thoroughly. The obstructions in those crooked corners are easily cleaned. Come with a lightweight and compact aluminum carrying case, a great tool keep on hand.
• ♛【Charging Cables and White Tubes】: Charging cables and white tubes to fits two different size injectors, it can be used for almost all brands of cars and motorcycle fuel injectors. The alligator clip has a wide opening range, strong bite force, high hardness and toughness of the wire. As an adapter for DIY cleaning the fuel injector nozzle, removed the injector from the engine, it can be cleaned separately.
• ♛【Points for Attention】: When you release the adapter, some cleaner may squirt out, definitely use protective gloves and wear eye protection. You can put a rag around where the nozzle can connect to keep cleaner from spraying everywhere. Clean the area around the fuel injectors before removing them, as dirt and grime can build up over time and can get into the cylinder if not cleaned.